Aickinstrut Fiberglass - Polyurethane Adjustalbe Pipe Clamp

Part No. Design Load - lbs (kN) Finish Design Load - Lbs (kN) (NOT Reviewed & Approved)
200-3100 135 Polyurethane 65
200-3110 135 Polyurethane 65
200-3120 145 Polyurethane 70
200-3130 215 Polyurethane 70
200-3140 215 Polyurethane 70

    System Number

    Part~No. Nominal Size (in.) PVC Sch. 80 & Rigid Metal Design Loads (lbs.)* Type 1 Design Loads (lbs.)* Type 2 FRP Bolt Size (in.)
    PCR-050 1/2 0.84 225 90 3/8 x 1-1/4
    PCR-075 3/4 1.05 225 90 3/8 x 1-1/4
    PCR-100 1 1.315 225 90 3/8 x 1-1/4
    PCR-125 1-1/4 1.66 225 90 3/8 x 1-1/4
    PCR-150 1-1/2 1.9 225 90 3/8 x 1-1/4
    PCR-200 2 2.375 225 90 3/8 x 1-1/4
    PCR-250 2-1/2 2.875 225 90 3/8 x 1-1/4
    PCR-300 3 3.5 225 90 3/8 x 1-1/4
    PCR-400 4 4.5 300 125 3/8 x 1-1/4
    PCR-600 6 6.625 300 125 3/8 x 1-1/4
    PCR-800 8 8.625 300 125 3/8 x 1-1/4
    *Design loads shown represent a 3:1 safety factor.

    Notes

    Standard Dimensions:

    • Hole Diameter: 13/32"

    • Hole Spacing (From End): 13/32"
      Accommodates 3/8"
      Hardware

    • Hole Spacing (On Center): 1-5/8"

    • Width: 1-5/8"

    • Thickness: 3/8"

    Additional Notes

  • Aickinstrut Rigid Pipe Clamps resemble the more traditional style of pipe clamps.
  • These clamps are made from glass-reinforced polyurethane and are sized based on the pipe inside diameter or nominal size.
  • Polyurethane clamps are recommended for applications up to 160°F.
  • For high temperature applications (up to 230°F), PVDF clamps are available as a special order. Contact the factory for pricing and availability.
  • Care should be taken not to exceed the recommended torque values of the rigid pipe clamps.