Aickinstrut Fiberglass - Non-Metallic U-Bolt

U-Bolt-figure_3.png
Part No. A B C D Design Load - lbs (kN) Finish
UB-050 0.937 0.375 1.568 2.412 135 Polyurethane
UB-075 1.125 0.375 1.662 2.6 135 Polyurethane
UB-100 1.375 0.375 1.787 2.85 135 Polyurethane
UB-125 1.687 0.375 1.943 3.162 135 Polyurethane
UB-150 2 0.375 2.1 3.475 135 Polyurethane
UB-200 2.437 0.5 2.468 4.187 135 Polyurethane
UB-250 2.937 0.5 2.718 4.687 135 Polyurethane
UB-300 3.562 0.5 3.031 5.312 135 Polyurethane
UB-400 4.062 0.5 3.281 5.812 135 Polyurethane
UB-600 4.562 0.5 3.531 6.312 135 Polyurethane

    System Number

    Part~No. Size --A-- --B-- --C-- --D--
    UB-050 1/2 0.937 0.375 1.568 2.412
    UB-075 3/4 1.125 0.375 1.662 2.6
    UB-100 1 1.375 0.375 1.787 2.85
    UB-125 1-1/4 1.687 0.375 1.943 3.162
    UB-150 1-1/2 2 0.375 2.1 3.475
    UB-200 2 2.437 0.5 2.468 4.187
    UB-250 2-1/2 2.937 0.5 2.718 4.687
    UB-300 3 3.562 0.5 3.031 5.312
    UB-350 3-1/2 4.062 0.5 3.281 5.812
    UB-400 4 4.562 0.5 3.531 6.312
    UB-600 6 6.75 0.625 5.75 9.875
    *Torque and load values shown represent a 3:1 safety factor.

    Notes

    Standard Dimensions:

    • Hole Diameter: 13/32"

    • Hole Spacing (From End): 13/32"
      Accommodates 3/8"
      Hardware

    • Hole Spacing (On Center): 1-5/8"

    • Width: 1-5/8"

    • Thickness: 3/8"

    Additional Notes

  • Note: Plate not included. Illustration purpose only
  • Aickinstrut Nonmetallic U-Bolts provide a corrosion resistant alternative to traditional metallic U-Bolts.
  • Made from glass-reinforced polyurethane, these bolts will outlast stainless steel in most corrosive applications.
  • Nonmetallic U-Bolts have oversized diameters which allow them to hold steel conduit and plastic pipe.
  • Each U-Bolt comes with two polyurethane hex nuts. Additional nuts and washers can be purchased separately.
  • The U-Bolts can also be installed to allow for thermal expansion and contraction of plastic pipe as shown here.